Inverter welder; 4.3kVA; 230VAC; 20A; 50/60Hz; MMA,TIG; IP20S; 56V

    Multiples: 1.0
    Minimum quantity: 1.0
    Product code: 2014
    Manufacturer: STAMOS
    Manufacturer code: 2014
    • Supply voltage
    • IP rating
    • Kit contents
    • Kit contents
    • Kit contents
    • Kit contents
    • Kit contents
    • Kit contents
    • Kit contents
    • Power consumption
    • Efficiency
    • Insulation class
    • Input current
    • Supply voltage frequency
    • Power factor
    • Open circuit voltage
    • Electrode diameter (MMA)
    • Electrode diameter (TIG)
    • Welding method
    • Welding method
    • Welding current at 100% duty cycle
    • Welding current TIG-DC
    • Welding current MMA
    • Welding equipment features
    • Welding equipment features
    • Welding equipment features
    • Welding equipment features
    • Welding equipment features
    • Welding equipment features
    • Welding equipment features
    • Welding current at 60% duty cycle
    • Nominal duty cycle
    • Method of cooling the handle
    • Cutting current at 100% duty cycle
    • Cutting current
    • Cutting current at 60% duty cycle
    • Maximal thickness of material being cut
    • Dimensions (a x b x c)

    0.00 € 0.00 € (wo VAT) 0.0 EUR

    0.00 €

    This combination does not exist.

    Add to Cart

    Specification for Inverter welder; 4.3kVA; 230VAC; 20A; 50/60Hz; MMA,TIG; IP20S; 56V

    Supply voltage 230V AC
    IP rating IP20S
    Kit contents ground clamp with 3,6m cable, hammer with a wire brush, MMA welding holder with 3.5m cable, plasma cutting holder with 4m cable, spare TIG holder accessories, TIG welding holder with 4m cable, welding mask
    Power consumption 4.3kVA
    Efficiency 85%
    Insulation class F
    Input current 20A
    Supply voltage frequency 50/60Hz
    Power factor ≥0.93
    Open circuit voltage 56V
    Electrode diameter (MMA) 1...4mm
    Electrode diameter (TIG) 1...3.2mm
    Welding method MMA, TIG
    Welding current at 100% duty cycle 139.4A
    Welding current TIG-DC 10...180A
    Welding current MMA 10...160A
    Welding equipment features ANTI STICK - prevents electrode from sticking to welding material, ARC FORCE - electrical arc stablization, HOT START - easy to initiate an electrical arc, integrated solenoid gas valve, MOSFET technology, overload / failure indicator, TIG HF - non-contact electrical arc ignition using high frequency
    Welding current at 60% duty cycle 180A
    Nominal duty cycle 60%
    Method of cooling the handle air
    Cutting current at 100% duty cycle 35A
    Cutting current 0...50A
    Cutting current at 60% duty cycle 50A
    Maximal thickness of material being cut 16mm
    Dimensions (a x b x c) 530x200x360mm